Power cables: (ABPC010)
For the power supply to the control cases, a 10 ft power cable is used.
The cable is oil resistant (yellow) jacketed (STOOW) and contains 16 AWG conductors.
The 110 volt AC (or optional 220 volt AC) power plug is mounted on one side.
On the mating side to the control cases, a keyed, locking sleeve secured, non metallic 4
pins connector is provided.
This plug and the bulkhead on the control boxes are IP 68 rated and provided with dust
caps, to protect the connectors when not mated.
For the power supply to the control cases, a 10 ft power cable is used.
The cable is oil resistant (yellow) jacketed (STOOW) and contains 16 AWG conductors.
The 110 volt AC (or optional 220 volt AC) power plug is mounted on one side.
On the mating side to the control cases, a keyed, locking sleeve secured, non metallic 4
pins connector is provided.
This plug and the bulkhead on the control boxes are IP 68 rated and provided with dust
caps, to protect the connectors when not mated.
C-View connectors are rated to 221° F and are UL recognized and CSA certified.
Connectors
We simply connect
Cable assemblies used on a C-View system:
Power cable ( to supply 110 volt AC to the Control cases) (2 each)
Comms cable ( to connect the Control cases to the Actual Transmitters
and the Actual Receiver Units (2 each)
Antenna cable ( to connect the antennas to the Actual Transmitters and
the Actual Receiver Units (2 each)
Power cable ( to supply 110 volt AC to the Control cases) (2 each)
Comms cable ( to connect the Control cases to the Actual Transmitters
and the Actual Receiver Units (2 each)
Antenna cable ( to connect the antennas to the Actual Transmitters and
the Actual Receiver Units (2 each)
Comms cable (ABCC100)
The comms cable is a quad screened 75 ohms coaxial cable, with an additional conductor.
The connectors used on either end are 3 pins male plugs, which are field installable
The comms cable is a quad screened 75 ohms coaxial cable, with an additional conductor.
The connectors used on either end are 3 pins male plugs, which are field installable
Antenna cable (ABAC030)
The antenna cable is a 3 ft 50 ohms heavy duty coax, installed directly to the antenna.
The free end provided with a N styled Stainless Steel Coaxial connector.
The antenna cable is a 3 ft 50 ohms heavy duty coax, installed directly to the antenna.
The free end provided with a N styled Stainless Steel Coaxial connector.